Cool Arrow

Vehicle Recovery and Fleet Management

Highlights

  • GPRS 850/900/1800/1900
  • Integrated cellular and GPS antenna
  • LED status indicators for GPS and network registration
  • Communication via SMS, UDP, Ack UDP
  • Over the air configuration and firmware update
  • Extended AT Command set for flexible and easy configuration
  • Up to 16 Polygon (‘Geo-fences’)

The Arrow Tracker is a real-time vehicle tracking system designed for vehicle recovery, fleet management, and more.

IT’S RELIABLE

The ultra-thin yet extremely durable Arrow-2G is a high performance cellular tracking device designed for vehicle tracking, lot management, theft recovery, or other fleet applications. With an integrated GPS receiver, the Arrow-2G includes a GPRS modem for wireless data communication and nationwide coverage. The built in high performance antennas for both cellular radio and (‘GPS receivers make installation easy.

IT’S SIMPLE

No programming skills required: The Arrow comes with easy-to configure software. Reports can be triggered periodically or in response to events such as motion, speeding, harsh acceleration and braking, geo-fence violations, and battery status. Notifications can be sent for vehicle towing, battery removal, and more.

IT’S FUNCTIONAL

The Arrow’s interfaces include a serial port for communication with terminals and devices, power, ground, four GPIO pins that can be used for dedicated ignition, relay, and I/O. Optional features include a built in 3-axis accelerometer for motion detection and monitoring driver behavior; an internal Lithium-Ion back up battery (BBU) that allows for continuous operation (up to 5 hours when the device is disconnected from the main power); and a buzzer alert system for driver warnings.

ELECTRICAL CELLULAR

  • 850/900/1800/1900 MHz GPRS
  • Integrated high sensitivity antenna
  • Auto register to packet network

GPS

  • Channels: 56javelinjavelin
  • Tracking Sensitivity: -162 dBm
  • Acquisition Sensitivity: -148 dBm
  • Location Accuracy: 2.5 CEP

INTERFACE CONNECTOR

  • I/O Connector: 8 Pin Male 3mm
  • PWR, GND
  • UART (RX/TX)
  • 4 – GPIOs or dedicated I/Os, for Ignition, Relay, UART
  • Max voltage tolerance – 28V

PHYSICAL

  • Dimensions: 91mm x 39.4mm x 15.7mm
  • Internal Cellular and GPS Antennas
  • Internal Battery: 80mAh
  • Operating Voltage: 7V – 28V
  • Voltage over-protected TVS 36V and fused
  • Power Consumption: Sleep – 13mW typical GPS Acquisition – 325mW typical GPS Tracking/Reporting – 625mW

ENVIRONMENTAL

  • Operation Temperature: -30°C to +75°C w/o BBU
  • Operation Temperature: -20°C to +60°C w/BBU
  • Storage Temperature: -40°C to +85°C
  • Operation Humidity: 20% to 90% (non-condensing)
  • Storage Humidity: 10% to 95% RH (non-condensing)

APPROVALS

  • FCC 47 CFR Part 15, Part 22, and Part 24
  • RoHS2 and WEEE
  • PTCRB, IC and CE